Shopping List
Shopping List
SGD - S$
Image
/
/
/
/
Dmc Crimp Tool for Terminals AMT4001 (M22520/40-01)
Dmc Crimp Tool for Terminals AMT4001 (M22520/40-01)
Brand:
DMC
Model:
M22520/40-01
Image
Image
Product Description

Daniel Manufacturing Corporation (DMC) Crimp Tool for Terminals AMT4001 (M22520/40-01)

The AMT4001 (M22520/40-01) crimp tool is a fast, manually operated tool for crimping AS7928 (MIL-T-7928) Ring Terminals and Splices for wire sizes 26 through 14 (terminal and splice color codes Small-Yellow, Red, and Blue).

The AMT4001 provides a ratchet controlled crimp to ensure full crimp force/closure is applied. The handles will not open until they have been fully closed and the crimp completed.

The tool is equipped with a locator to hold terminals and splices in place for crimping.

The AMT4001 is 10 3/4 inches long, and weighs 1.48 lbs. For long life and optimum performance, this tool should be kept clean and handled carefully, as any other precision instrument.

MIL Qualified Gages are available for checking calibration. Red Conductor - AMTG4301, Red Insulation - AMTG4303, Blue Conductor - AMTG4302, Blue Insulation - AMTG4304.

Tool also produces crimped assemblies that comply with the IPC/WHMA-A-620-A Industry Guidelines for Stamped and Formed-Closed Barrel-Insulation Support Crimps.

Key benefits

  • Cycle controlled
  • Wire sizes 26 through 14
  • Adjustable insulation barrel
  • The height of the insulation crimp barrel can be adjusted to accommodate different insulation diameters.

Crimping Procedure

  1. Strip wire to the dimension specified by the terminal, splice, or endcap manufacturer.
  2. If the die cavity is not already open, close the tool handle until the ratchet releases and the die cavity opens.
  3. Place the color coded terminal, splice, or endcap into the proper cavity of the crimp dies, so that the terminal tongue slides under the locator, the splice window slides under the locator, or endcap end rests against the recess in the locator.
  4. Close the tool handles until the terminal, splice, or endcap is held in place, but not crimped.
  5. Insert the stripped wire into the terminal until the conductor butts against the locator. Or insert the stripped wire into the splice or endcap until the conductor butts against the internal stop of the splice or endcap.
  6. Hold the wire in position and complete the crimp by closing the handles fully until the ratchet releases.
  7. If crimping a splice, rotate splice 180 degrees and repeat steps 3-6.

Handle and Dot Color Codes

Note that the tools handles are color coded for the size terminal, splice, or endcap being crimped. The color coded terminal, splice, or endcap should be crimped in the corresponding colored cavity. For example, when crimping red coded insulated terminals the red/yellow crimp cavity on the red handle side of the tool should be used.

S$ 2,573.00 – S$ 2,663.00
(exc. GST)
S$ 2,804.57 - S$ 2,902.67
(inc. GST)
Image
This product will be active soon.
Image
Lead time of 7 working days required.
Item will be ready to dispatch within the lead time specified.
Certificate:
Please select an option
Image
Quantity:
/ EA
Highly Matched Items
View items that have the same or are a close match to the specifications of this item
Crimping & Stripping Pilers from DMC
Source & compare similar products
More from Crimping & Stripping Pilers
Expand your search with a wider selection
Recently Viewed Products
Compare & Refer to previously viewed items
Image
Top